networkroad.com 
2003-7-3 
|
fxp is the Intel EtherExpress pro (and compatible) range of NIC cards as viewed by FreeBSD. Other ethernet cards have different names. This is a specific FreeBSD format. If you were to install a NE2000 in an Olive, that would be edX. Linux, on the other hand, calls all ethernet cards ethX and Solaris calls them hmeX. The fxp repersents the management and internal ethernet interface in the Juniper router. JUNOS sets up the software for 3 interfaces initially: -fxp0 is an out-of-band-management interface (Ethernet mgmt port) -this interface must be explicitly configured -fxp1 is an internal Ethernet interface & connects the Routing Engine to the Packet Forwarding Engine. -this interface is not configurable -lo0 is the loopback interface -this interface must be explicitly configured There are some good documents online at www.juniper.net that describe many technical questions. | |
 相关文章 |
热门文章 |
|
| 个人观点：Cisco认证和Juniper认证的比较 JNCIE考试心得 路由器启动进程及初始配置 Olive完整介绍--权威版 Install IPSO on PC Juniper提升路由器服务功能 RFC2547 BGP/MPLS VPN RFC 2547bis (1) RFC 2547bis (2) RFC 2547bis (3) |
| 文章评论 | |||